Making their presence known, the XL Dinosaur Climbing Holds are truly Jurassic in size! These colossal bolt-on climbing holds give kids a chance to hang from a Brontosaurus or soar with a Pterodactyl. Add unique climbing holds to your climbing wall to make it fun and educational.
These bolt-on holds are designed to be attached to 3/4" plywood or thicker material with stainless steel bolts and zinc t-nuts. Choose optionally to include stainless bolts and t-nuts so you have everything you need when your holds arrive! For screw-on holds, see our XL Dinosaur Climbing Holds - Screw-On (Set of 5).
All Atomik climbing holds are made in the USA, and include a Lifetime Warranty.
Rock Hold Set Features
Set of 5 extra large bolt-on holds
Select from Standard or Premium Colors (colors may vary from pictures)
Great for children's climbing walls
Choose to order with or without stainless steel hardware
Lifetime Warranty on climbing holds
Made in the USA
Dinosaur Rock Hold Shapes
There is a jug on its head and an incut rail along his spine and tail
Measures: 13" wide x 6-1/2" tall x 3" standing off the wall
There is a jug on its back and if rotated, you can grab an edge on the armored head
Measures: 9-1/2" wide x 5" tall x 2-1/2" standing off the wall
This early bird has a jug on its head
Measures: 8-1/2" wide x 6-1/2" tall x 2-7/8" standing off the wall
You can grab its head or on the bony plates
Measures: 11-3/4" wide x 5-1/2" tall x 3-1/4" standing off the wall
Pinch its neck, grab the head, its back or its tail
Measures: 8-1/2" wide x 6-1/4" tall x 3-1/4" standing off the wall
This bolt-on set can be purchased with or without hardware
Requires 3/8-16 Allan head bolts (regular lag bolts will not fit)
Choose to order with or without stainless Allan head bolts and set of t-nuts
Installing extra t-nuts allows for easy re-arrangement of holds!
Hardware set includes L-wrench for tightening bolts
Screw-on holds attach with either wood screws or concrete Tapcon screws. All you need is 3/4" thick plywood or a thicker material. Bolt-on holds attach with one 3/8-16 Allan head bolt into a 3/8-16 t-nut. The bolt passes through the hold into the panel and then into the t-nut which has been installed in to the back of the panel. The bolt-on system is nice because you can easily move or rotate holds quickly. The t-nuts stay in place in back of the wall.
Screw-on holds attach using drywall, decks screws or concrete Tapcon screws. Atomik Climbing Holds use #6 zinc plated 1-5/8" screws for the majority of the product line. This system is nice because you are not limited to where you can put a hold. You can also attach screw-on holds to concrete walls using Tapcon screws (this will require a hammer drill to drill holes for concrete screws).
If installing against drywall or concrete, be sure to "fur" the plywood away from the wall so that the bolts from the holds don’t bottom out against the material. See How to Build a Wall for complete instructions.