This new wood beam hanger uses only 1 bolt. It has teeth on top of the hanger to prevent it from turning after installation. It is a very strong hanger with an "oil lite" bronze bearing and axle bolt with lock tight nut. It has a shackle pendulum that does not require an S-Hook for connections to the chain but is tamper resistant and requires an allen wrench with special hole to open and close.
Features
Installation
Installing this swing hanger will require removing pendulum with a socket wrench in order to access the underside of the mounting hole. The mounting hole is approximately 1/2" square and is designed to work with a carriage bolt that has a square "neck". This will further prevent the Single Bolt Swing Hanger from twisting.
Recommended Use: | Commercial |
---|---|
Tags: | Commercial |
leadTime: | 3-5 |